CONTENT

目錄

1                 Design basis and conditions     設計依據和條件                                   2

2                 Scope of proposal           項目范圍                                                     4

3                 Performance guarantees     履約保函                                                6

4                 Description of the plant   工廠描述                                                7

4.1    Process description  工藝描述                                                     7

4.2    Electricity and automation電氣和自動化                                         11

5                 Main equipment List  主機設備清單                                                     16

6                 Project Schedule項目過度表                                                               19

7                 Site service and technology training    服務與技術培訓                        20

     Annex1  Equipment list of the cement line

附件1：水泥生產線設備清單

     Annex2  Process flow sheet

      附件2：工藝流程

     Annex3  General layout

      附件3：總體布局

1.   Design basis and conditions

1.1       Locations of the plant:       

1.2       Technology way:             dry rotate kiln technology

1.3       Production capacity           1000t/d clinker 

1.4       Cement variety                          Ordinary Portland Cement according to

Chinese standard

1.5       Site condition

Plant site condition(工廠條件)

1.5.1 Altitude of the site above sea-level(廠址海拔標高)：60m

1.5.2 Temperature(溫度):

Annual average(年平均):

Average of the hottest month: Max. (最熱月份平均氣溫：最高):  48 ℃

Average of the coldest month: Min. (最冷月份平均氣溫：最低):   8 ℃

1.5.3 Rainfall (降雨量)

Max. (within a hour/day) (最大降雨量：一小時/天):   2 mm

Annual average(年平均):   6 mm

Number of rainy days(降雨天數) ： 80 days

1.5.4 Earthquake factor at site(廠區地震等級):  No

1.5.5 Max. wind velocities at site(廠區最大風速): 140m/s

1.6       Characteristics of Raw Materials

1.7       Seismic intensity                  < Richter scale 7Characteristics 

1.8       A plan and flat land is assumed with the soil bearing capacity of  200 kpa/m2

1.9       Wind pressure                       Pa

1.10    Temperature: yearly average         ℃

1.11    Clinker module

The contractor can specify the raw material proportioning for raw meal, The average components of clinker must be in conformity with the requirements of clinker module.:

承包商可以指定生料配料，熟料的平均成分必須符合熟料模塊的要求：

Lime saturation value of clinker：KH=0.89±0.01。

熟料的石灰飽和值：KH = 0.89±0.01

Silica modulus：              SM=2.6±0.1。

二氧化硅模量：SM = 2.6±0.1

Alumina iron modulus：        IM=1.6±0.1。

鋁鐵模數：IM = 1.6±0.1